Demex Epoxy Sand Grouts
Two-component epoxy grout, sand-matt finish
Two-component epoxy grout with a sand-matt finish to match textured and matt-glazed tiles. 12 colours, including 4 new shades for 2026.
- Packaging480 g twin cartridge with mixing nozzle; 30 sets/carton
- Colours12 colours – see the colour chart in the Demex catalogue
- DocumentsTDS and test reports · 15 pages
Request a quotation 0903 166 617
- Genuine Demex products, distributed in Vietnam by VNA
- TDS and test reports viewable right on this page
- Independently tested: SGS, Eurofins A+
- Support with material selection, consumption and submittal dossiers
TDS and test reports
Demex Epoxy Sand Grouts technical dossier
Applications
- Grouting textured, matt-glazed and sugar-glazed tiles
- Floors and walls where a matt joint should blend with the tile
Advantages
- Sand-matt finish
- Hard, stain-resistant joints
- 12 colours
Application steps
- Clean the joints: clean, dry, at least 3 mm deep.
- Fit the mixing nozzle and discard the first bead.
- Dispense into the joint and tool the surface.
- Wait 2–4 hours, then clean off excess grout.
Technical data
| Property | Value | Standard |
|---|---|---|
| Abrasion | 72 mm³ (requirement ≤ 250) | ISO 13007-3:2010 |
| Shrinkage | 0.8 mm/m (requirement ≤ 1.5) | ISO 13007-3:2010 |
| Flexural strength | > 58 N/mm² (requirement ≥ 30) | ISO 13007-3:2010 |
| Compressive strength | > 93 N/mm² (requirement ≥ 45) | ISO 13007-3:2010 |
| Water absorption after 240 minutes | 0.05 g (requirement ≤ 0.1) | ISO 13007-3:2010 |
Packaging
- 480 g twin cartridge with mixing nozzle; 30 sets/carton
Data per Demex Epoxy Sand Grouts product documentation. Test values were obtained under laboratory conditions; contact VNA for the latest technical documents.
Need a quotation for Demex Epoxy Sand Grouts?
VNA helps select materials, prepares submittal dossiers and guides application on site.