Keshun XS-505
Exposed acrylic rubber-emulsion waterproof coating
Water-based, UV-resistant waterproof coating used fully exposed on roofs and exterior walls.
- Consumption2.0 kg/m² per 1 mm film; recommended total film from 1.5 mm
- Packaging20 kg pail
- DocumentsTDS and test reports · 5 pages
Request a quotation 0903 166 617
- VNA is a Keshun-authorized distributor – see the letter
- TDS and test reports viewable right on this page
- Keshun product certifications
- Support with material selection, consumption and submittal dossiers
TDS and test reports
Keshun XS-505 technical dossier
Applications
- Exterior walls
- Exposed concrete roofs
- Residential waterproofing repair and renovation
Advantages
- Water-based, safe to apply
- UV-resistant, stays fully exposed
- Elastic; applied by brush or roller
Application steps
- Apply 2–3 cross coats of about 0.5 mm each until the required total thickness is reached.
Technical data
| Property | Value |
|---|---|
| Solids content | ≥ 60 % |
| Tensile strength | ≥ 2.5 MPa |
| Elongation at break | ≥ 200 % |
| Tear strength | ≥ 12 N/mm |
| Watertightness | 0.6 MPa for 30 minutes, no penetration |
Packaging
- 20 kg pail
- Shelf life 12 months
Consumption
- 2.0 kg/m² per 1 mm film; recommended total film from 1.5 mm
Data per Keshun XS-505 TDS (2024). Test values were obtained under laboratory conditions; contact VNA for the latest technical documents.
Need a quotation for Keshun XS-505?
VNA helps select materials, prepares submittal dossiers and guides application on site.