Buildmix Epoxy Tar
Two-component coal-tar epoxy anticorrosive coating
Two-component coal-tar epoxy coating protecting tanks, steel structures and concrete pipes against corrosion.
- ConsumptionAbout 1.5 m²/kg (2.2 m²/L)
- PackagingBrown or black
- DocumentsTDS and test reports · 5 pages
Request a quotation 0903 166 617
- Genuine Buildmix products, distributed in Vietnam by VNA
- TDS and test reports viewable right on this page
- Goods delivered with CO/CQ per batch
- Support with material selection, consumption and submittal dossiers
TDS and test reports
Buildmix Epoxy Tar technical dossier
Applications
- Storage tanks, reservoirs, concrete pipes, sewer pipes
- Steel drums, steel structures, bridges
- Chemical plants
Advantages
- Over 250 µm per spray pass
- Non-volatile content above 70 %
Notes
- Not for drinking-water tanks.
Technical data
| Property | Value |
|---|---|
| Density | > 1.4 kg/L |
| Pot life | 5 hours at 25 °C |
| Hard dry | 24 hours; full cure after 7 days |
Packaging
- Brown or black
Consumption
- About 1.5 m²/kg (2.2 m²/L)
Data per Buildmix Epoxy Tar TDS. Test values were obtained under laboratory conditions; contact VNA for the latest technical documents.
Related products
BuildmixBuildmix EP 202WTwo-component water-based epoxy coating TDS · 5 pages
KeshunKeshun Aquaprufe APF-CPre-applied self-adhesive HDPE membrane (sand-faced) TDS · 25 pages
KeshunKeshun Aquaprufe APF-D110Pre-applied TPO membrane, heat-welded seams TDS · 2 pages
KeshunKeshun Aquaprufe APF-D100Butyl self-adhesive TPO membrane TDS · 26 pagesNeed a quotation for Buildmix Epoxy Tar?
VNA helps select materials, prepares submittal dossiers and guides application on site.