Buildmix EP 202W
Two-component water-based epoxy coating
Two-component water-based epoxy coating, low VOC, tar-free; protects concrete in treatment tanks and light industrial floors.
- ConsumptionConcrete floors: 0.3–0.4 kg/m² in 2 coats
- Packaging20 kg set: component A 16 kg + component B 4 kg (A : B = 4 : 1)
- DocumentsTDS and test reports · 5 pages
Request a quotation 0903 166 617
- Genuine Buildmix products, distributed in Vietnam by VNA
- TDS and test reports viewable right on this page
- Goods delivered with CO/CQ per batch
- Support with material selection, consumption and submittal dossiers
TDS and test reports
Buildmix EP 202W technical dossier
Applications
- Wastewater treatment tanks, septic tanks
- Light industrial floors and walls, garages, warehouses, kitchens
Advantages
- Water-based, low VOC
- Resists 10 % NaCl, 10 % NaOH, 5 % H₂SO₄ and oils
- Adhesion from 1.5 MPa
Application steps
- Concrete substrate sound and clean.
- Mix A and B; up to 10 % water may be added.
- Apply 2 coats, 12–24 hours apart (at 30 °C).
- Cure 5–10 days before putting into service.
Technical data
| Property | Value | Standard |
|---|---|---|
| Adhesion | ≥ 1.5 MPa (or concrete failure) | ASTM D7234 |
Packaging
- 20 kg set: component A 16 kg + component B 4 kg (A : B = 4 : 1)
- Shelf life 12 months
Consumption
- Concrete floors: 0.3–0.4 kg/m² in 2 coats
- Treatment tanks: 0.5 kg/m² in 2 coats
Data per Buildmix EP 202W TDS. Test values were obtained under laboratory conditions; contact VNA for the latest technical documents.
Related products
BuildmixBuildmix Epoxy TarTwo-component coal-tar epoxy anticorrosive coating TDS · 5 pages
KeshunKeshun Aquaprufe APF-CPre-applied self-adhesive HDPE membrane (sand-faced) TDS · 25 pages
KeshunKeshun Aquaprufe APF-D110Pre-applied TPO membrane, heat-welded seams TDS · 2 pages
KeshunKeshun Aquaprufe APF-D100Butyl self-adhesive TPO membrane TDS · 26 pagesNeed a quotation for Buildmix EP 202W?
VNA helps select materials, prepares submittal dossiers and guides application on site.