Buildmix Intoseal
Cementitious crystalline waterproofing powder
Cementitious crystalline waterproofing for concrete structures, effective on both the positive and the negative side.
- ConsumptionBrush coat: 0.7–1.0 kg/m² per coat
- Packaging25 kg bag
- DocumentsTDS and test reports · 6 pages
Request a quotation 0903 166 617
- Genuine Buildmix products, distributed in Vietnam by VNA
- TDS and test reports viewable right on this page
- Goods delivered with CO/CQ per batch
- Support with material selection, consumption and submittal dossiers
TDS and test reports
Buildmix Intoseal technical dossier
Applications
- Water tanks, lift pits
- Diaphragm walls, basement base slabs
- Pile-head treatment
Advantages
- Works on both positive and negative sides
- Brush-applied on damp substrates or dry-shaken before concreting
- Adhesion above 0.5 N/mm²
Application steps
- Dampen the concrete surface.
- Mix the powder with water and apply 2 coats.
- Moist-cure for 3 days.
Technical data
| Property | Value |
|---|---|
| Adhesion | > 0.5 N/mm² |
| Working time | 60–90 minutes |
Packaging
- 25 kg bag
Consumption
- Brush coat: 0.7–1.0 kg/m² per coat
- Water head below 5 m: 1.4–2.0 kg/m² in 2 coats; above 5 m: 2.1–3.0 kg/m² in 3 coats
- Dry-shake on basement slabs before concreting: 3.0 kg/m² (depth under 5 m), 4.0 kg/m² (over 5 m)
Data per Buildmix Intoseal TDS. Test values were obtained under laboratory conditions; contact VNA for the latest technical documents.
Related products
KeshunKeshun Aquaflex KS-101Cementitious capillary crystalline waterproofing mortar TDS · 11 pages
KeshunKeshun Aquaprufe APF-CPre-applied self-adhesive HDPE membrane (sand-faced) TDS · 25 pages
KeshunKeshun Aquaprufe APF-D110Pre-applied TPO membrane, heat-welded seams TDS · 2 pages
KeshunKeshun Aquaprufe APF-D100Butyl self-adhesive TPO membrane TDS · 26 pagesNeed a quotation for Buildmix Intoseal?
VNA helps select materials, prepares submittal dossiers and guides application on site.